Latest Products http://www.ajtechnology.in Latest Products Fri, 14 May 2021 01:22:06 +0530 en-us http://www.ajtechnology.in PCC Panel http://www.ajtechnology.in/pcc-panel.htm http://www.ajtechnology.in/pcc-panel.htm Fri, 23 Oct 2020 00:00:00 +0530 Power Control Centre (PCC) measured to be the base of an electrical organism in any industry. Hence it shall present users long term dependability, protection, low maintenance & testing time. Power Control Centre (PCC) is used for distribution and control of different power source used in industry. Usually Power Control Centres is set up near power source hence fault level is high. It is planned to suit fault level of 50KA or 65 KA for 1 sec. Power Control Centres are intended to suit the fault level as well as temperature rise to 40°c above ambient. These are accessible in a wide range (from 630A to 6300 A) to match every user’s requirement. Power Control Centre is Reliable, Compact and Safe Assemblies offering maximum reliability For each rated present range, most favourable connection conditions for cables Split function partitions consisting of a toggle device, auxiliary tools and a cable connection compartment for safety Contribute way with no any sacrifices in terms of practical specifications High short period existing carrying capacity for time-graded short-circuit guard assures dependable operation of the switchboard without being pretentious by short-circuit Suggestion & procedure in the door closed situation Main LT Panel, PCC With single, multiple incomer, bus couplers with proper interlocking required protection, fault indications, interlocking is provided. MCC Panel http://www.ajtechnology.in/mcc-panel.htm http://www.ajtechnology.in/mcc-panel.htm Fri, 23 Oct 2020 00:00:00 +0530 We offer an extensive range of MCC Panel (Motor Control Center) that is a device used to control and actualize the performance of an electric motor. These MCC Panels are offered in a wide variety such as compartmentalized with ACB/ MCCB SFU, DOL, ATS or Star Delta Starters. This range of MCC Panels can be fully drawn out with incoming and outgoing feeders or non draw out type. The MCC Panels are extensively used for reducing start voltage, reversing control or varying the speed as per requirement and for protection against overloads and faults. Control centre can be single or double front operated Floor mounted design Automatic/ manual means of starting and stopping the motor Fully drawn out with incoming and outgoing feeders or non draw out type   Busbar Arrangement The Busbar shall be housed in a separate compartment. The Busbar shall be isolated with 3 mm thick FRC or acrylic sheet to avoid any accidental contact. The Busbar shall be arranged such that minimum clearances between the Busbar are maintained as per below. Between phases : 27 mm min. Between phases and neutral : 25 mm min. Between phases and earth : 25 mm min. Between neutral and earth : 23 mm min. APFC Panel http://www.ajtechnology.in/apfc-panel.htm http://www.ajtechnology.in/apfc-panel.htm Fri, 23 Oct 2020 00:00:00 +0530 Automatic Power Factor Control or APFC Panels are mainly used for the improvement of Power Factor. Power Factor is the ratio of active power to apparent power and it is a major component in measuring electrical consumption. APFC is an automatic power factor control panel which is used to improve the power factor, whenever required, by switching ON and OFF the required capacitor bank units automatically. This is very strong and durable. It is very easy to operate. It is dust proof and has high tensile strength. It required low maintenance. This is also known as automatic power factor correction panels. This product is made of best quality of raw material. It is very eco-friendly. It is connected with electricity boards. This is widely used for installation purpose. It has micro controller switch.   Busbar Arrangement The Busbar shall be housed in a separate compartment. The Busbar shall be isolated with 3 mm thick FRC or acrylic sheet to avoid any accidental contact. The Busbar shall be arranged such that minimum clearances between the Busbar are maintained as per below. Between phases : 27 mm min. Between phases and neutral : 25 mm min. Between phases and earth : 25 mm min. Between neutral and earth : 23 mm min.   Component Selection Detuned harmonic filters are the series combination of a reactor and power capacitor. This filter offers higher impedance for high frequency harmonics. This prevents harmonic resonance and amplification. Each capacitor bank is equipped with discharge devices capable of reducing the residual voltage to below 10% of the rated capacitor voltage in about 30 seconds. Delay timer used to protect Circuit from reverse flow while capacitor is discharging Drive Panel http://www.ajtechnology.in/drive-panel.htm http://www.ajtechnology.in/drive-panel.htm Fri, 23 Oct 2020 00:00:00 +0530 When a VFD starts a motor, it initially applies a low frequency and voltage to the motor. The starting frequency is typically 2 Hz or less. Starting at such a low frequency avoids the high inrush current that occurs when a motor is started by simply applying the utility (mains) voltage by turning on a switch. When VFD starts, the applied frequency and voltage are increased at a controlled rate or ramped up to accelerate the load without drawing excessive current. This starting method typically allows a motor to develop 150% of its rated torque while drawing only 50% of its rated current. When a motor is simply switched on at full voltage, it initially draws at least 300% of its rated current while producing less than 50% of its rated torque. As the load accelerates, the available torque usually drops a little and then rises to a peak while the current remains very high until the motor approaches full speed. A VFD can be adjusted to produce a steady 150% starting torque from standstill right up to full speed while drawing only 50% current. Control Panel http://www.ajtechnology.in/control-panel.htm http://www.ajtechnology.in/control-panel.htm Mon, 26 Oct 2020 00:00:00 +0530 Control panel consist of a controller. Controller may be PLC, DCS, relay or some other type. It gives digital signal input signal to the MCC panel to start the motor. Control panel works based on the PLC /DCS program or the relay logic. Instruments are normally connected to control panel. Indications for the interlocks also will be there in control panel. Nowadays single panel is used of using separate control and MCC panel. Ease in modification of logic, reduced size, means of remote communications and advances in the technology have made PLC Automation Control Panels an edge over conventional relay based systems. Control Systems Engineers has provided PLC based Panels from PLC of Allen Bradley, Siemens,ABB and etc., From small I/O application to the complex I/O systems are provided by the Control Systems Engineers. Control Systems Engineers have developed communication software's for remote communication of the PLC Panels in various different protocols. With PLC based Panels HMI/MMI are provided to provide the operator various messages and controls of the process plants touch screen MMI are provided. To effective control of the system.   Feature Manufacturers across the globe capitalize on AC variable frequency drive technology to save money on their utility bills, increase quality control, decrease production downtime, and improve overall efficiency on production lines. Junction Box Panel http://www.ajtechnology.in/junction-box-panel.htm http://www.ajtechnology.in/junction-box-panel.htm Fri, 23 Oct 2020 00:00:00 +0530 An electrical junction box is an enclosure housing electrical connections, to protect the connections and provide a safety barrier. With MOC of SS, MS, FLP with IP rating of IP4etc. PLC Panel http://www.ajtechnology.in/plc-panel.htm http://www.ajtechnology.in/plc-panel.htm Fri, 23 Oct 2020 00:00:00 +0530 Aiming to satisfy our clients optimally, we provide them with a quality approved array of PLC Panels. The offered panels are designed by our vendors’ skilled professionals, using optimum quality raw materials and latest technology in accordance with the international standards. To wire the control panels electronically is the primary function of PLC control panel. PLC panel will reduce the usage of number of relays. Space required for PLC is less when compared to relays hence there will be no space constraint. Furthermore, offered products are made available in different sizes and various technical specifications to fulfill the various requirements of our clients. Feeder Pillar Panel http://www.ajtechnology.in/feeder-pillar-panel.htm http://www.ajtechnology.in/feeder-pillar-panel.htm Fri, 23 Oct 2020 00:00:00 +0530 Feeder pillars are the breaker panels which is the very first set of switching/protection device at the output/secondary side of the transformer and panel board is a set of switching/protection devices used for distribution of power supply. Feeder pillar is an effective electrical enclosure to provide electrical services for low voltage electrical distribution applications. It is designed as compact and robust for vandalism protection. The metal enclosure is made of sheet steel of minimum 1.6mm thickness, mounted on a steel base frame of minimum 3mm thickness. Enclosure is suitable for outdoor application. Feeder pillars are the breaker panels which is the very first set of switching/protection device at the output/secondary side of the transformer and panel board is a set of switching/protection devices used for distribution of power supply. Feeder pillar is an effective electrical enclosure to provide electrical services for low voltage electrical distribution applications. It is designed as compact and robust for vandalism protection. The metal enclosure is made of sheet steel of minimum 1.6mm thickness, mounted on a steel base frame of minimum 3mm thickness. Enclosure is suitable for outdoor application. Marshaling Panel http://www.ajtechnology.in/marshaling-panel.htm http://www.ajtechnology.in/marshaling-panel.htm Fri, 23 Oct 2020 00:00:00 +0530 These can either be outdoor or indoor applications depending on the customer’s requirements. Marshalling kiosks are used to provide convenient connection points for the various control, protection and instrumentation wires which go to, and come from, all the different substation plants. This includes power, distribution and instrument transformers, switchgear and SCADA equipment. Marshalling kiosks are usually custom designed for each application, ensuring the correct amount of equipment is included for both the currently envisaged requirement and for future expansion. They can be provided with front and rear access or front only access where substation space is limited. Power Distribution Panel http://www.ajtechnology.in/power-distribution-panel.htm http://www.ajtechnology.in/power-distribution-panel.htm Fri, 23 Oct 2020 00:00:00 +0530 Power distribution panel is an essential component of every electricity supply system. These boards feed electrical power to different circuits that provide protective and efficient fuse and circuit breakers for every circuit and can be accessed with simplicity in case of an electrical fault. Power distribution system is increasingly growing with the incorporation of increasing level of building automation and renewables. We have access to the best electrical power distribution board panel manufacturers, who have an experienced team of professionals. When working with electricity safety is the main consideration. Moreover, the panels are quality tested to precisely define every parameter before being delivered to the customers. A wide range of applications makes a high level of flexibility in the power distribution. Power failure can be unpredictable; within seconds, it can shut down entire infrastructure by disabling all crucial operations. In order to keep track of varying types of equipment, distribution panels provide multiple outlets of power. To maintain the customer’s requirements for high performance and reliable power equipment, we supply a vast range of AMF Panels. With the help of the electric distribution panel, you can divide an electrical power into subsidiary circuits. These are widely used in commercial and industrial fields in order to supply more power. When you buy a product, you always make sure to buy a good quality one. We offer panel boards at a reasonable cost and high-quality. HT Panel http://www.ajtechnology.in/ht-panel.htm http://www.ajtechnology.in/ht-panel.htm Fri, 23 Oct 2020 00:00:00 +0530 Definition – HT panel is a metal enclosure fitted with HT Circuit Breakers, relays &metering that is used to receive 11KV/33KV supply (from one or more source) & distribute the power through its outgoing feeders. Outgoing feeder may be one or more it depends on the load of the building.   HT panel is installedin substations of Commercial complexes, residential colonies, factories, schools, hospitals etc. to receive & distribute HT supply. HMI Operator Panel http://www.ajtechnology.in/hmi-operator-panel.htm http://www.ajtechnology.in/hmi-operator-panel.htm Mon, 26 Oct 2020 00:00:00 +0530 hmi control panel for process area, with front glass door for protection of hmi in moc of ss304 and ms enclosure IEC Panel http://www.ajtechnology.in/iec-panel.htm http://www.ajtechnology.in/iec-panel.htm Fri, 23 Oct 2020 00:00:00 +0530